Browse Our Catalog

Puller Sets - Page 3 - Blowout Sale! Save up to 68%


Blowout Sale! Up to 68% off on Puller Sets at Road compass, Page 3. Top brands include Mo-Clamp, KTM, DASBET, PMD Products, Mueller-Kueps, H & S Auto Shot, 8MILELAKE, E-flite, OTC, Motion Pro, Zinger, CARTMAN, HOTPDR, Stanley-Proto, & Lisle. Hurry! Limited time offers. Offers valid only while supplies last.



Mo-Clamp MOC1340 Bolt Puller
By Mo-Clamp
In Stock
$63.66
$60.42
You Save: 5%

mpn: MOC1340, ean: 0842729028770,

4.3 out of 5 stars with 149 reviews
MOC1340 Features: -Made for suspension and frame bolts that are hard to reach for realigning or straightening. -2.5 tons of pulling capacity. -Made from Tru-Tuff steel alloy. -Made in the USA. Product Type: -Pullers. Use: -Alligning & Measuring. Quantity: -Single. Dimensions: Overall Height - Top to Bottom: -4 Inches. Overall Width - Side to Side: -5 Inches. Overall Depth - Front to Back: -8 Inches. Overall Product Weight: -1.92 Pounds.Made for suspension and frame bolts that are hard to reach


KTM 50 SX SR JR MINI Clutch & Stator puller tool 59029021044
By KTM
In Stock
$32.00

mpn: 59029021044,

4.9 out of 5 stars with 132 reviews
KTM Clutch & Stator extractor (Puller) tool KTM PART# 59029021044 An essential tool for removing the clutch or stator from the 2001-2008 KTM 50. This is a must have tool for the KTM 50 Mechanic. You will need this tool to dissassemble the Clutch to either tune or repair any clutch issues. A high quality tool that will provide you with years of service.An essential tool for removing the clutch or stator from the 2001-2008 KTM 50..


DASBET 5PCS Pickle Fork Ball Joint Separator Set Tie Rod/Ball Joint Separator Kit for Separating Ball Joints Tie Rods Pitman Arms
By DASBET
In Stock
$39.59

mpn: Z0088, ean: 0687925996177,

4.0 out of 5 stars with 124 reviews
Ball Joint Separator : Used to remove shock linkage, tie rods, and ball joints Also for general service on many cars and light trucks. The pickle fork wedge open size: 11/16'' (18mm), 15/16'' (24mm), 1-1/16'' (29mm), 1-7/16'' (36mm), and 1-5/8'' (42mm) Fork depth: 2-3/4'' (70mm), 3'' (76mm), 2-7/8'' (73mm), 2-3/8''(60.3mm), and 3-1/8'' (80mm) Durable heavy duty forged constructed from chrome vanadium steel for strength and longevity. This tool set is not intended for any work with power


PMD Products 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer
By PMD Products
In Stock
$49.99

mpn: 1670,

4.7 out of 5 stars with 11 reviews
16 Piece Universal Blind Hole Puller Kit with extra large expanding collets For removing internal pull type bearings like pilot and needle bearings This puller will remove blind housing bearings without the need to dismantle machinery or remove the running shaft Split collect design works with perfectly with blind bearings Range: 8mm to 58mm 3 lb (1.4Kg) Chrome Plated Slide Hammer Made of drop forged heat treated steel Collets attach to hammer or can be sued with adjustable bridge tool Bridge


Mueller-Kueps 433 414 Gold Uni Drive Shaft Pusher/Hub Puller
By Mueller-Kueps
In Stock
$218.81

mpn: 433 414, ean: 4260257985116,

4.6 out of 5 stars with 102 reviews
Use this universal tool to push out bonded (micro-encapsulated) or heavily corroded drive shafts. The ''VIBRO-IMPACT'' Principle: the vibration impact of the pneumatic wrench is transmitted to the wheel hub and to the drive shaft through the trapezoidal thread spindle. When used in conjunction with the slide hammer 433 450, the drop-forged flange can also be used for extracting wheel hubs.Use to push our bonded or heavily corroded drive shafts. Works with most wheel hubs with pitch circle


H & S Auto Shot DTK-7700 Dent Puller
By H & S Auto Shot
In Stock
$137.97
$124.38
You Save: 10%

mpn: DTK-7700, ean: 0842005030848,

4.0 out of 5 stars with 96 reviews
A quality machined dent puller for professional use Comes with three different sized vacuum cups and a durable storage case Self-contained vacuum feature, no airlines required Can be used anywhere: inside a shop or outside on a lot Quick and easy approach to dent repair Works on steel or aluminum panels, as well as bumpersUNI-VAC DENT PULLER (UNI-DTK7700).


8milelake Harmonic Installer Balance Damper Pulley Puller Set
By 8MILELAKE
In Stock
$39.99

mpn: D00702, ean: 0615200835835,

4.9 out of 5 stars with 105 reviews
Includes 3-Jaw Puller for harmonic balancer jobs Designed to remove and install the harmonic balancer on the most popular Chrysler, Hyundai, and Mazda enginesDesigned to remove and install the harmonic balancer on the most popular Chrysler, Hyundai, and Mazda engines. Includes 3-Jaw Puller for harmonic balancer jobs.


E-flite Gear Puller: 1mm-5mm Shaft
By E-flite
In Stock
$17.99
$14.99
You Save: 17%

mpn: EFLA212, ean: 0696748176376,

4.7 out of 5 stars with 78 reviews
E-flite Gear Puller: 1mm-5mm Shaft, EFLA212Gear Puller: 1mm-5mm Shaft.


OTC (938) 17-1/2 Ton Push Puller
By OTC
SKU: #37863
In Stock
$273.25
$172.49
You Save: 37%

sku: 37863, mpn: 938, ean: 0731413006098,

4.9 out of 5 stars with 125 reviews
The OTC 938 gives you the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors and more. This can be used with 1124 and 1130 bearing pulling attachments or 679 and 680 pulley pullers. May also be used with internal pulling attachments: 1150, 1151, 1153, 1165 or 1166. Use this for the ease of pulling.Maximum reach is 11-1/2 inches. Spread of 3-1/8 inches - 11-3/4 inches. Screw size 1 inch-14 x 13-1/4 inches. It can be used with several


OTC-J-45876 Cylinder Liner Puller
By OTC
In Stock
$909.95

mpn: J-45876, ean: 0738964563797,

4.9 out of 5 stars with 9 reviews
• Applications: Detroit Diesel SERIES 60, MTU S2000 • This tool is used to remove cylinder liners..


Motion Pro Steering Head Race Puller 08-0545
By Motion Pro
In Stock
$53.99

mpn: 08-0545, ean: 0779423050151,

4.5 out of 5 stars with 104 reviews
Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punch Puller design ensures bearing is pulled perfectly straight to eliminate possible damage to frame Easy to use Works on all tapered bearing races with 47mm to 52mm OD Brass bearing washers for easy use and long life Hardened steel jaws engage securely on inner bearing lipDesigned to quickly and precisely remove outer bearing race from the steering head without the use of a


Zinger Mercury Mariner Force Yamaha 1 1/2" -16 Flywheel Puller Removal Tool 91-849154T1
By Zinger
In Stock
$29.99
$18.99
You Save: 37%

mpn: 4336330658, ean: 0688209848489,

4.8 out of 5 stars with 139 reviews
Mercury Mariner Force Yamaha Flywheel Puller with crank shaft protector 91-849154T1 1 1/2'' - 16 TPI tool,5/8'' - 18 TPI Bolt Threads For Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2''-16 TPI threads units from the 1960s to Present, but please check thread diameter to verityMercury Mariner Force Yamaha Flywheel Puller with crank shaft protector 91-849154T1. 5/8''-18 TPI Bolt Threads. Nice craftsmanship and solid. For Most 45HP+ Mercury, Mariner, Force and Yamaha


Zinger 35mm Flywheel Puller M35 X 1.5 R.H. Right Hand Thread Flywheel Puller Remover Tool for YAMAHA GRIZZLY 350 400 450 550 660 700 Rotor
By Zinger
In Stock
$39.99
$21.99
You Save: 45%

mpn: FlywheelPuller005, ean: 0688209848847,

4.1 out of 5 stars with 97 reviews
35mm Flywheel Puller,M35 X 1.5 R.H. Right Hand Thread Flywheel Puller Remover Tool for YAMAHA GRIZZLY 350 400 450 550 660 700 Rotor This item fits the following applications: YFM 350:1997 YFM 400P:2001 YFM 700R:2006 YFM 400FM:2000 YFM 400FT:2005 YFM 400FAT:2005 YFM 400FA 22:2004 YFM 350FAH40:2004 YFM 400S:2004 2005 YFM 35XS:2004 2005 YFM 35AS:2004 2005 YFM 400FS:2004 2005 YFM 35FXS:2004 2005 YFM 350FX: 1995 1996 YFM 350S/RT:2004 2005 YFM 400FAHS:2004 2005 YFM 400A: 2000 2001 2002 YFM


CARTMAN Slide Hammer Puller Set
By CARTMAN
In Stock
$69.99

mpn: EA-1QYI-HHQO, ean: 0702411639335,

4.7 out of 5 stars with 34 reviews
Cartman Slide Hammer Puller Set Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes. 5lb. Slide Hammer, 425mm long, 5/8''UNF thread Front Hub puller, Rear Axle puller, Locknut Cone Dent puller screws (large and small), Supplied in blow mold storage case.Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted


8MILELAKE Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller GM, Ford, Chrysler Auto Air Conditioning Remover Installer
By 8MILELAKE
In Stock
$19.59

mpn: D00702B, ean: 0615200836382,

4.9 out of 5 stars with 146 reviews
A/C Compressor Clutch Remover Puller Replaces clutches found on FS6, C171, 6P, and 148 compressors, GM R4 and A6, HR -6, DA -6 and V5 A/C compressors, Sanyo compressors SD505, 507, 510, 708, and 7092 and 3 hole puller plate fits most clutches, mechanical force does the pullingReplaces clutches found on FS6, C171, 6P, and 148 compressors, GM R4 and A6, HR -6, DA -6 and V5 A/C compressors, Sanyo compressors SD505, 507, 510, 708, and 709. 2 and 3 hole puller plate fits most clutches, mechanical


HOTPDR Paintless Dent Repair Tool Auto Body Puller Kit Removal Tools Silde Hammer For Car Hail Damage And Automotive Door Dings Repair with Hot Melt Glue Gun PDR Tools (40 Pcs)
By HOTPDR
In Stock
$79.99
$25.99
You Save: 68%

mpn: H-60006, ean: 0889787989735,

4.4 out of 5 stars with 8 reviews
One of the most annoying and frustrating things is when you find a dent on your beloved car. Good news! No more paying for the body shop repairs! Paintless Dent Repair Kits are the new products for removing most minor,and even some major dents, without repainting the vehicle and damaging the factory finish.It's only a tad cost when comparing to a body shop repair. The main reason is no labor cost and no high paint material cost associated like a conventional repair. The Process is 100%


Stanley Proto J5049 Reversible Jaw Slide Hammer Puller
By Stanley-Proto
In Stock
$192.17
$99.08
You Save: 48%

mpn: J5049, ean: 0662679472368,

4.8 out of 5 stars with 35 reviews
Stanley J5049 Proto Reversible Jaw Slide Hammer Puller Versatile puller which will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc. Reversible Jaw Slide Hammer Puller Either 2 or 3 puller jaws may be used to handle ''inside'' pulling jobs such as bearing cups and outer racers, as well as regular ''outside'' pulling jobs. The 5-lbs slide hammer can be removed and used independently. 11.00-lbs Weight, 27-inch Overall length.Versatile puller


OTC 6284 Harmonic Balancer Puller Set for Chrysler
By OTC
In Stock
$103.49
$99.95
You Save: 3%

mpn: 6284, ean: 0731413038853,

4.2 out of 5 stars with 65 reviews
OTC Harmonic Balancer Puller Set for Chrysler allows the technician to remove and install the harmonic balancer on the most popular Chrysler engines. It includes OTC puller, which removes the harmonic balancer from the crankshaft; and OTC holding tool, which holds the harmonic balancer when tightening or loosening the crankshaft bolt, or removing the balancer.Allows the technician to remove and install the harmonic balancer on the most popular Chrysler engines. Includes puller which removes the


Lisle 65710 Porcelain Puller
By Lisle
In Stock
$33.06
$30.30
You Save: 8%

mpn: 65710, ean: 0083045657101,

4.7 out of 5 stars with 90 reviews
Porcelain Puller for 65700 WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Includes a unique Porcelain Puller Tool that snaps onto the terminal of a broken spark plug to pull the porcelain out. Also includes a Porcelain Pusher for when the porcelain breaks off in the spark plug tip and a Self-Tapping Puller to remove the seized metal


OTC Tools 4581 Slide Hammer And Blind Hole Bearing Puller Set
By OTC
In Stock
$167.95
$119.95
You Save: 29%

mpn: 4581, ean: 0731413039690,

4.4 out of 5 stars with 75 reviews
The OTC blind hole bearing puller set is for those jobs requiring an internal pull. The set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer. Set includes a 2-1/2 pounds slide hammer with a T-handle and comes housed in a blow-molded



Viewing Page 3 of 5

View more products in Pullers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - roadcompass.org. All Rights Reserved.