Browse Our Catalog

Puller Sets - Extreame Savings! Save up to 42%


Extreame Savings! Up to 42% off on Puller Sets at Road compass. Top brands include CTA Tools, Pasco Speciality Tools, Kaupa, OTC, KKmoon, Vector Tools, OEMTOOLS, Stanley-Proto, DASBET, Heartland Products, KISSLER & CO. INC, 8MILELAKE, ATD Tools, Performance Tool, Tiger Tool, & ARES. Hurry! Limited time offers. Offers valid only while supplies last.



CTA Tools 8090 Slide Hammer Puller Set
CTA Tools 8090 Slide Hammer Puller Set
By CTA Tools
In Stock
$105.75

mpn: 8090, ean: 0053001080908,

4.1 out of 5 stars with 13 reviews
Slide hammer puller set easily removes bearings, gears, bushings, seals, grease retainers, etc. Four jaw assemblies for both inside and outside pulling with either a 2 or 3-jaw configuration. Adjusting cone keeps jaws in place. Three jaw range is 1-1/2-Inch to 4-1/2-Inch (38 to 114mm) outside, 1-5/16-Inch to 4-3/4-Inch (33 to 121mm) inside. Two jaw range is 1-Inch to 4-1/2-Inch (25 to 114mm) outside. 1-1/4-Inch to 3-3/8-Inch (32 to 86mm) inside. Center rod is 5/8-Inch - 18 by 22-Inch (56cm)


Lasco 13-2708 Compression Sleeve Puller
Lasco 13-2708 Compression Sleeve Puller
By Pasco Speciality Tools
In Stock
$50.33

mpn: 4665, ean: 0671451466501,

4.8 out of 5 stars with 99 reviews
Lasco 13-2708 Compression Sleeve PullerCompression Sleeve Puller pulls the nut and compression sleeve off of the copper pipes. Use on 1/2-inch (5/8 OD) copper pipe. Precision machined plumbing tool. Saves time and effort when replacing old angle stops. Great handyman tool.


Kauplus 5-ton Bar-Type Puller/Bearing Separator Set
Kauplus 5-ton Bar-Type Puller/Bearing Separator Set
By Kaupa
In Stock
$58.24

mpn: AMZPC0015, ean: 0682698742020,

4.0 out of 5 stars with 40 reviews
The Kauplus drop forged construction separator tools are used with bar puller and legs for a wide variety of pulling jobs. The 5'' puller cross-bar with a 6-1/4'' forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools. This combination set includes two most popular bearing ''splitters'' (2'' and 3''), four sets of hex push-puller legs and a bar-type puller head with a 9/16'' forcing screw. Come with blow case for keeps set


OTC 4800 Clutch Hub and Alternator Puller
OTC 4800 Clutch Hub and Alternator Puller
By OTC
In Stock
$39.95
$35.21
You Save: 12%

mpn: 4800, ean: 0031113094464,

4.7 out of 5 stars with 109 reviews
Removes clutch on Big Twins with 3, 5, and 10 fingers. Also works on Sportster transmission sprocket and clutch. Pulls motor sprockets, alternator covers, and many general pulling applications.Removes clutch on Big Twins with 3, 5 and 10 fingers. Also works on Sportster transmission sprocket and clutch. Pulls motor sprockets, alternator covers, and many general pulling applications. One year limited warranty.


KKmoon Car Van Battery Terminal and Wiper Arm Puller 6-28mm Repair Tool
KKmoon Car Van Battery Terminal and Wiper Arm Puller 6-28mm Repair Tool
By KKmoon
In Stock
$12.99

mpn: 4333093343, ean: 0605757122182,

4.7 out of 5 stars with 37 reviews
Car Battery Terminal Bearing Wiper Arm Remover Puller 6-28mm Repair Tool.Specifications Color:black+silver Material:metal Package size:approx. 18 * 11 * 3cm / 7 * 4.3 * 1.2in   Package weight:approx. 310g / 11oz What is in the Box 1 * Repair ToolTop quality, designed for professional use.. A perfect tool to remove the stuck on wiper arm.. Tighten knurled cone to force jaws under the cable clamp.. Turn center screw to lift clamp off terminal.. Also removes bolted-on windshield wiper arms that


OTC 522 Large Gear and Pulley Puller
OTC 522 Large Gear and Pulley Puller
By OTC
In Stock
$81.95
$47.59
You Save: 42%

mpn: 522, ean: 0080850302141,

4.5 out of 5 stars with 10 reviews
The OTC 522, with this tool you can easily remove a wide range of gears, pulleys or other parts that have tapped holes. It's simple to use and easy to store.Spread from 2 inches to 7-3/4 inches. Block is 8-1/4 inches wide. Forcing screw is 3/4 inch-16 x 11-5/8 inches long. Accommodates any cap screw up to 1/2 inch diameter. Similar to Ford D80L-522-A and 303-D025.


Vector Tools Harmonic Balancer Steering Wheel Gear Puller Kit 13pcs with Case
Vector Tools Harmonic Balancer Steering Wheel Gear Puller Kit 13pcs with Case
By Vector Tools
In Stock
$14.99

mpn: FBA_67541, ean: 0643845645922,

4.1 out of 5 stars with 47 reviews
13pc Harmonic Balance Puller Drop Forged, Heat Treated, precision-machined bolts Alloy Steel Center screw features floating, removable swivel that applies even pressure, preventing damage Yoke allows 2 or 3 hole application Applies even pressure, preventing damage Removes harmonic balances, steering wheels and gear pulleys Includes: 1pc Center screw 1pc Floating swivel 2pc 5/16'' x 4'' bolts 2pc 1/4'' x 3'' bolts 3pc 1/4'' x 2'' bolts 3pc 5/16'' x 2'' bolts 1pc Yoke 1pc Blow Molded CaseDrop


OEMTOOLS 27031 Pulley Puller/Installer
OEMTOOLS 27031 Pulley Puller/Installer
By OEMTOOLS
In Stock
$25.97
$22.99
You Save: 11%

mpn: 27031, ean: 7258007097537,

4.0 out of 5 stars with 95 reviews
The OEMTOOLS Pulley Puller/Installer fits pulleys with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, and 1-3/8 Inch. It includes two screws for use on most Ford, Chrysler, GM and VW power steering pulleys with Saginaw, Thompson, and Ford C111 and C2 pumps. Also Pulls Pulleys on GM belt driven vacuum pumps, and the pressed on water pump pulleys of GM V6 engines. Includes molded storage carrying case.Fits Pulleys with Hub Diameters Measuring 1-1/8, 1-1/4, 1-5/16 and 1-3/8 Inch. Comes with Molded


OTC 1675 13-Ton Capacity Puller Set
OTC 1675 13-Ton Capacity Puller Set
By OTC
In Stock
$1,128.93

mpn: 1675, ean: 0731413007187,

4.7 out of 5 stars with 59 reviews
OTC 1675 13-Ton Capacity Puller Set is a versatile puller set for general bearing maintenance such as removing gears, pulleys, bearings, shafts, pinions, outer races, and other tightly fitted parts. The set includes our most popular pullers including: OTC’s Grip-O-Matic Pullers, Push-Pullers, Slide Hammers, and Flange Pullers with pulling capacity ranging from 2 tons to 13 tons. To broaden the application of these pullers, this set also includes the following attachments: Bearing Splitters,


Stanley Proto J4234B 10 Ton -Ease 2-Way Straight Jaw Puller Set
Stanley Proto J4234B 10 Ton -Ease 2-Way Straight Jaw Puller Set
By Stanley-Proto
In Stock
$290.79
$290.72

mpn: J4234B, ean: 0662679470654,

4.0 out of 5 stars with 114 reviews
Stanley J4234B 10 Ton Proto-Ease 2-Way Straight Jaw puller set Reach: 2-15/16-inch, 4-11/16-Inch, 7-1/8-inch (18-Inch with jaws bolted together) - Spread: 10-Inch 15.37-Weight.Pullers are made using alloy steel for maximum strength and durability. Spreading capacity ranges from 4'' to 11''. Rated capacity of 2 to 10 Tons. Puller applications include gear, alternator, transmission and more. 10 Ton Proto-Ease 2-Way Straight Jaw puller set. Reach: 2-15/16-inch, 4-11/16-Inch, 7-1/8-inch (18-Inch


OTC (1179) Silver Slapper 8-Way Slide Hammer Puller Set
OTC (1179) Silver Slapper 8-Way Slide Hammer Puller Set
By OTC
SKU: #36965
In Stock
$141.07
$130.74
You Save: 7%

sku: 36965, mpn: 1179, ean: 0069060272352,

4.5 out of 5 stars with 97 reviews
The OTC 1179 allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts. Includes: the 1155 Slide hammer with 5lb. hammer, 7372 Rear axle pulling attachment, 3-way cross-head, 24545 Cone, 27241 2-way cross-block, 27315 Puller hook attachment, 34698 Pulling jaws (3) for internal or external pulling jobs, 205378 Grip wrench adapter w/single lead (wrench not included), and 205377 Dent puller attachment. Use for 2/3-way internal or external jobs.5


DASBET 14PCS Bearing Separator Puller Set 2'' and 3'' Splitters Remove Bearings Kit, Heavy Duty
DASBET 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit, Heavy Duty
By DASBET
In Stock
$40.99

mpn: Z0063, ean: 0687925995699,

4.2 out of 5 stars with 140 reviews
Features: Including: Two Bearing separator jaws (Splitters) - 2'' & 3'' Extension Legs: 5'' - 4 pcs Extension Legs: 4'' - 4 pcs Yoke center adapter: 6'' - 1 pcs Puller Head Bar: 6.9'' - 1 pcs Hooks: 2pcs Forcing screws【APPLICABLE】To remove gears, pulleys, bearings, steering wheels, etc.. 【INCLUDING】2'' and 3'' size separators, 5'' puller cross-bar, 6-1/4'' lead screw, etc.. 【VERSATILE】Separator tools are used with bar puller and legs for a wide variety of pulling jobs.The 5''


Harley Davidson Evolution Inner Cam Bearing Installer & Puller EVO
Harley Davidson Evolution Inner Cam Bearing Installer & Puller EVO
By Heartland Products
In Stock
$104.99

mpn: ICBLEVO-B13 + ICBPEVO-B14,

4.1 out of 5 stars with 146 reviews
This listing is for a Inner Cam Bearing Puller and Installation ToolDesigned for 1986 to Present Single Cam EVO.This set will remove and install the inner cam bearing on single cam EVO.We combine shipments!. Due to Amazon settings, each item will charge shipping, but we do not make money on shipping and will refund excessive shipping charges!. If you have any questions regarding this policy, please contact us..


OTC 4536 A/C Clutch Pulley Puller Set
OTC 4536 A/C Clutch Pulley Puller Set
By OTC
In Stock
$65.19
$58.19
You Save: 11%

mpn: 4536, ean: 0731413039409,

4.7 out of 5 stars with 62 reviews
For removal of stubborn air conditioning clutch pulleys. Also can be used on many alternator, generator, power steering and crankshaft pulleys, harmonic balancers, and fiber timing gears. This set includes drop-forged components: one 3/4''-16 x 5'' live center forcing screw, 5-1/2'' crossbar with 3 spread settings, two pair of jaws and a clamp bolt. All included in a blow molded plastic case.Removes the air conditioning clutch pulley. Has a spread of 3'' to 5''. With a reach of 1'' to 5''. Set


KISSLER 08-0422 Deluxe Faucet Handle Puller
KISSLER 08-0422 Deluxe Faucet Handle Puller
By KISSLER & CO. INC
In Stock
$24.24

mpn: 08-0422, ean: 0026607016947,

4.5 out of 5 stars with 59 reviews
Handle Puller Deluxe.Deluxe Faucet Handle Puller. Contractor Grade. Hardened Steel. Non Corrosive.


8milelake 18pcs Injector Remover Puller Set VAG VW Car Repair Garage Installer Tools Kit
8milelake 18pcs Injector Remover Puller Set VAG VW Car Repair Garage Installer Tools Kit
By 8MILELAKE
In Stock
$83.99

mpn: SZ, ean: 0700425112905,

4.6 out of 5 stars with 125 reviews
Injector remover/installer and service kit for petrol injectors found in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7, V6, 3.0, V6, 3.2 V6, 3.6 V6 and 4.2 V8 FSI enginesinstaller and service kit for petrol injectors found in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7, V6, 3.0, V6, 3.2 V6, 3.6 V6 and 4.2 V8 FSI engines. Injector remover and service kit for petrol injectors found in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7, V6, 3.0, V6, 3.2 V6, 3.6 V6 and 4.2 V8 FSI engines.


ATD Tools 3057 Flange Type Axle and Front Wheel Hub Puller
ATD Tools 3057 Flange Type Axle and Front Wheel Hub Puller
By ATD Tools
In Stock
$28.95
$21.69
You Save: 25%

mpn: 3057, ean: 0663126030575,

4.6 out of 5 stars with 120 reviews
Flange Type Axle and Front Wheel Hub Puller.For use on domestic and import cars and light trucks. Range is 3-3/4'' to 4-1/2''. For use on four, five, or six bolt stud design and all non-C lock GM axles. Can be used with ATD-3045, heavy-duty puller set.


Performance W89414 4-piece Metric Stud Puller Set
Performance W89414 4-piece Metric Stud Puller Set
By Performance Tool
In Stock
$31.20
$23.61
You Save: 24%

mpn: W89414, ean: 0039564894145,

4.0 out of 5 stars with 121 reviews
Quickly and easily removes right or left threaded studs with no damage to threads. Turn with 3/8-Inch or 1/2-Inch square drive tool or 13/16-Inch wrench. For hand use only. Chrome vanadium steel construction. 3/8-Inch Drive Sizes: 6 and 8mm. 1/2-Inch Drive Sizes: 10 and 12mm.Quickly and easily removes right or left threaded studs with no damage to threads. Turn with 3/8-Inch or 1/2-Inch square drive tool or 13/16-Inch wrench. For hand use only. Chrome vanadium steel construction.


Tiger Tool Automotive Universal Joint Puller 10105
Tiger Tool Automotive Universal Joint Puller 10105
By Tiger Tool
In Stock
$99.99

mpn: 10105, ean: 0683552101052,

4.5 out of 5 stars with 120 reviews
Provides ultimate brute strength for disassembling even the most seized U-joints in minutes on virtually all cars, light-duty trucks, and farm machinery. - Eliminates dangerous vice and socket or hammering methods.- Can be used on aluminum driveshafts.- Does not damage the driveshaft, yokes, joints or bearing cups.- One piece unit – No bolts, cables, or assembly required. ApplicationU-Joints with bearing cups 1″ to 1.25″ O.D. Note: Damage to flange style yokes may occur if bearing cups


ARES 71002 | Harmonic Balancer Puller Set | Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator Storage Case Included
ARES 71002 | Harmonic Balancer Puller Set | Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator Storage Case Included
By ARES
In Stock
$36.24

mpn: 71002, ean: 0818765027800,

4.8 out of 5 stars with 62 reviews
Easier Removal Of Damper Pulleys In Tight Engine Compartments This ARES Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator. With spring-loaded legs for optimal position retention and steel construction, you'll have the extra strength and enhanced design you need to get the job done. Whether you're working on a Chrysler, GM, Mitsubishi, Cadillac, or Oldsmobile, this set is the right fit. 



Viewing Page 1 of 5

View more products in Pullers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - roadcompass.org. All Rights Reserved.