Browse Our Catalog

Bearing Pullers - Super Savings! Save up to 34%


Super Savings! Up to 34% off on Bearing Pullers at Road compass. Top brands include ABN, Truper, FidgetFidget, OTC, Yukon Gear, Shankly, Tiger Tool, EBTOOLS, A B Tools, QuestCraft, HYDRAFORE, Motion Pro, ATD Tools, HFS, Sir Tools, G2 Axle & Gear, & ToolUSA. Hurry! Limited time offers. Offers valid only while supplies last.



ABN Bearing Puller with 1/2'' to 4-5/8” Inch Jaw – Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator
ABN Bearing Puller with 1/2" to 4-5/8” Inch Jaw – Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator
By ABN
In Stock
$39.99

mpn: 6878, ean: 0688295876878,

4.9 out of 5 stars with 97 reviews
Smoothly separate bearings and remove gears with the ABN Bearing Puller with 1/2'' to 4-5/8'' Inch Jaw - Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator. There are several uses for the puller arms and it will work where other pullers fail. Use them to remove pinions and differential bearings, take off shaft bearings and gears, and successfully rebuild your vehicle's transmission. If you want to remove a bearing, assemble the big silver plate below it, screw the black arms into the


TRUPER EX-PIT-L Pitman extractor, reach 54 mm, light use
TRUPER EX-PIT-L Pitman extractor, reach 54 mm, light use
By Truper
In Stock
$15.30
$10.37
You Save: 32%

mpn: EX-PIT-L, ean: 7501206683583,

4.2 out of 5 stars with 132 reviews
Pitman extractor, reach 54 mm, light use.


FidgetFidget Puller 6 Inch 150mm Two Jaw Arm Bolt Gear Wheel Bearing Car Auto Repair Tool
FidgetFidget Puller 6 Inch 150mm Two Jaw Arm Bolt Gear Wheel Bearing Car Auto Repair Tool
By FidgetFidget
In Stock
$27.38

mpn: KumorefunW-DEVI-720-9467ADB012, ean: 6954231840338,

4.6 out of 5 stars with 105 reviews
Description:Type:two jaw gear pullerMateiral:chrome-vanadium steelSize:150mm/6inchNet Weight:557g.


TRUPER EX-P6 Internal and external pulley puller, 3 arms, 6''
TRUPER EX-P6 Internal and external pulley puller, 3 arms, 6"
By Truper
In Stock
$29.95
$23.70
You Save: 21%

mpn: EX-P6, ean: 7501206640180,

4.6 out of 5 stars with 33 reviews
Bearing splitters.


OTC (1127) Bearing Splitter - 3/4'' to 13-3/8''
OTC (1127) Bearing Splitter - 3/4" to 13-3/8"
By OTC
In Stock
$779.00
$515.52
You Save: 34%

mpn: 1127, ean: 0731413006524,

4.0 out of 5 stars with 119 reviews
The OTC 1127 features knife-like edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, the puller jaws grip attachment’s outer edge; when used with a Push-Puller, the puller legs are threaded into the attachment’s two tapped holes. For use with OTC 1047, OTC 1073, and OTC 939 pullers.Maximum spread of 13-3/8 inches. Minimum spread of 3/4 inch. For use with OTC 1047, OTC 1073, and OTC


Yukon (YT P02) Extra-Large Clamshell for Carrier Bearing Puller
Yukon (YT P02) Extra-Large Clamshell for Carrier Bearing Puller
By Yukon Gear
In Stock
$228.82
$212.39
You Save: 7%

mpn: YT P02, ean: 0883584560319,

4.3 out of 5 stars with 81 reviews
Differential Tools from Yukon Gear and Axle are designed specifically for differential work to help you complete your repair, restoration or upgrade. If you work on differential systems, these are the industry trusted tools you need for your shop or garage.1 Year Warranty. For Use in Differential Applications. Designed for Specific Applications. Fits Carrier Bearing Puller.


Shankly Bearing Separator (75-105mm or 2.95' - 4.13' inches), Large Bearing Splitter
Shankly Bearing Separator (75-105mm or 2.95' - 4.13' inches), Large Bearing Splitter
By Shankly
In Stock
$47.50
$32.95
You Save: 31%

mpn: D1001, ean: 0780437646513,

4.1 out of 5 stars with 83 reviews
Shankly's bearing separator is designed to remove gears and bearings effectively, helping the user extract even the most stubborn bearings. This bearing splitter features two knife edges, ensuring a secure pulling surface so the mechanic to split bearings easily. Shankly's wheel bearing splitter features drop forged hardened alloy steel, making this bearing separator splitter one the mechanic can rely on long term. These bearing splitters can be used in conjunction with two leg mechanical


ABN 23 Piece Wheel Bearing Removal and Installation Tool Set
ABN 23 Piece Wheel Bearing Removal and Installation Tool Set
By ABN
In Stock
$63.99

mpn: 8930, ean: 0617209838930,

4.8 out of 5 stars with 43 reviews
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Front Wheel Drive Wheel Bearing Removal and Installation Tool Set, for the removal and installation of wheel bearings on front-wheel drive vehicles.. Eliminates the need for a front end alignment while also reducing the damage done to the hub and bearings. Designed to be used with


Tiger Tool Bolt-Retained Bearing Cup Installer with 12 month subscription to TruckFaultCodes
Tiger Tool Bolt-Retained Bearing Cup Installer with 12 month subscription to TruckFaultCodes
By Tiger Tool
In Stock
$103.00

mpn: 10201-TFC, ean: 0735520736114,

4.9 out of 5 stars with 23 reviews
10201 is designed for accurate installation of bolt-retained bearing cups. Fits virtually all heavy-duty truck and machinery type u-joints with bolt retained bearing cups. Application: Spicer 1610 - 1880 Operating Instructions: Safety Warning Read all instructions and safety warnings prior to operation. Failure to do so could result in equipment damage, personal injury or even death. 1. Ensure all parts to be assembled are clean and/or greased where applicable. 2. Double check all needle


EBTOOLS 3 Jaw Gear Puller,Inner Bearing Puller Bushing Gear Extractor Pilot Bearing Gear Puller Extractor Set Removal Tool Heavy Duty Automotive Machine Tool Kit for Car SUV Motorcycle
EBTOOLS 3 Jaw Gear Puller,Inner Bearing Puller Bushing Gear Extractor Pilot Bearing Gear Puller Extractor Set Removal Tool Heavy Duty Automotive Machine Tool Kit for Car SUV Motorcycle
By EBTOOLS
In Stock
$29.99

mpn: EBTOOLSfnxiypw92a, ean: 0798382322277,

4.0 out of 5 stars with 134 reviews
Description: Using high quality chrome vanadium just forging, special heat treatment for removing mechanical equipment combination of rod brake device and other parts of the ball joint. Specifications: Material: carbon steel Color: black Size: 200x135mm Wire rod length: 175mm Bar length: 125mm Arm length: 86mm Features: Removes bearings, pump bearings, brushings Removes all sleeve-type bearings with 1/2-2inside diameter Structure design, gently turning the small wrench can produce a strong


6'' 2 Arm Sliding Leg / Jaw Gear / Hub / Bearing Puller / Remover by US Pro AU005
6" 2 Arm Sliding Leg / Jaw Gear / Hub / Bearing Puller / Remover by US Pro AU005
By A B Tools
In Stock
$53.95

mpn: AU005, ean: 5056133312072,

4.9 out of 5 stars with 79 reviews
Professional tool suitable for everyday or occasional use. 6'' (150mm) gear puller. The claw legs are reversible for internal and external pulling. Fully adjustable design allows it to fit a variety of applications. Maximum reach and width both 150mm. Total length of the claws is 61/4''. Total length of the bolt is 9 3/4''. Claw feet protrude inwards by 1/2''. Drop forged, heat treated and chrome plated for strength and durability..


QuestCraft Internal & Extractor 16PC Blind Hole Pilot Bearing Puller Remove W/ Slide Hammer
QuestCraft Internal & Extractor 16PC Blind Hole Pilot Bearing Puller Remove W/ Slide Hammer
By QuestCraft
In Stock
$97.95

mpn: KOBRQ1Q, ean: 0854525587665,

4.0 out of 5 stars with 61 reviews
Features: ♦ One Slide hammer assemble 2.5 jaws. ♦ For removal of Pilot Bushes Bearings etc. form blind housings. ♦ Thread:M10×1.5p, M10×1.5p,M8×1.25p, M10×1.5p M6×1.0p ♦ **10 x Collects ( segment grip type) • 8-11mm • 12-17mm • 13-23mm • 18-23mm • 24-29mm • 30-34mm • 34-38mm • 39-43mm • 44-48mm • 49-53mm • 54-58mm ♦ **3pc Screw adaptors • M10x1.5p, • M10x1.5p/M8x1.25p, •


OTC 5048 1-1/4'' Flywheel Pilot Bearing Puller
OTC 5048 1-1/4" Flywheel Pilot Bearing Puller
By OTC
SKU: #15595
In Stock
$225.48

sku: 15595, mpn: 5048, ean: 0731413005657,

4.4 out of 5 stars with 96 reviews
OTC 1-1/4 inch Flywheel Pilot Bearing Puller these tools make quick work of pulling stubborn rusted pilot bearings. number 5048 fits 1-1/4 inch I.D. bearings. The puller's forcing screw expands the jaws inside the bearing and simultaneously pushes against the crankshafeetThis tool make quick work of pulling stubborn rusted pilot bearings. The puller's forcing screw expands the jaws inside the bearing and simultaneously pushes against the crankshaft. Fits 1-1/4 inch I.D. bearings.


Hydraulic Gear Puller with Locking Nut Bearing Wheel Pulling (20 tons) L-20S
Hydraulic Gear Puller with Locking Nut Bearing Wheel Pulling (20 tons) L-20S
By HYDRAFORE
In Stock
$229.00

mpn: L-20S,

4.5 out of 5 stars with 93 reviews
Hydraulic Gear puller with a rated output of 20tons, equipped with a holding nut. An intergrated design and able to fit any durable carrying case.Rated output=20 tons. Max stroke=3''. Spread Interval=2''-16''.


BEARING REMOVER 25MM MP
BEARING REMOVER 25MM MP
By Motion Pro
In Stock
$11.61

mpn: 15-8267,

4.8 out of 5 stars with 82 reviews
BEARING REMOVER 25MM MPBearing Remover Set - 25mm. BEARING REMOVER 25MM MP. Manufacturer: Motion Pro. Photos are for reference only, please read title and product description carefully..


ATD Tools 8622 10-Piece Bearing Race and Seal Driver Set
ATD Tools 8622 10-Piece Bearing Race and Seal Driver Set
By ATD Tools
In Stock
$60.53
$43.95
You Save: 27%

mpn: 8622, ean: 0663126086220,

4.3 out of 5 stars with 79 reviews
This 10 piece bearing race and seal driver set includes driver handle and (9) adapter sizes. These are 1.565 inches, 1.750 inches, 1.965 inches, 2.325 inches, 2.470 inches, 2.555 inches, 2.830 inches, 2.995 inches and 3.180 inches. The set makes it easier to install bearing races and seals without damage to race, axle housing or brake rotors.Machined aluminum construction. Includes driver handle and (9) adapter sizes. Makes it easier to install bearing races and seals without damage to race,


HFS R 10 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil
HFS R 10 Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil
By HFS
In Stock
$79.99

mpn: HGP-10TON, ean: 0688949764605,

4.6 out of 5 stars with 92 reviews
Operation principle Hydraulic pressure draw horse fill with post in pump as power source to drive horse s cylinder rod to move ahead.Hook claw flat can follow the fast regulate nut make the distance of adjusting go backwards to advance directly.Lift hand handle swing from head to foot while operating.namely output high-pressure oil make the draw horse s cylinder rod move forward,Hook claw corresponding to go backwards,the objected is pulled out. Range of application Overall puller is an ideal


SIR TOOLS HMB90 MASTER HUB AND BEARING REMOVER & INSTALLER B90
SIR TOOLS HMB90 MASTER HUB AND BEARING REMOVER & INSTALLER B90
By Sir Tools
In Stock
$629.95
$599.95
You Save: 5%

mpn: B90,

4.4 out of 5 stars with 60 reviews
FRONT, REAR OR A.W.D VEHICLES. BUILT IN SELF CENTERING MECHANISM. INCORPORATES A ROLLER THRUST BEARING. LINES UP STRAIGHT AS AN ARROW DURING R&R. Features and Benefits: Front, rear or A.W.D. vehicles Built in self centering mechanism Incorporates a roller thrust bearing Lines up straight as an arrow during R and R Comes complete with instruction manual The only unit in the world for R and R of the rear wheel hub and bearing of German vehicles, as well as front wheel hub and bearing of Asian,


G2 Axle & Gear 80-BRGPLLR G2 Clamshell Bearing Puller
G2 Axle & Gear 80-BRGPLLR G2 Clamshell Bearing Puller
By G2 Axle & Gear
In Stock
$445.00
$429.99
You Save: 3%

mpn: 80BRGPLLR,

4.1 out of 5 stars with 150 reviews
G2 Professional clamshell bearing puller. It is small, medium and large camshell with adjustable pilot, spacer sleeve, handy carrying and storage tray..


ToolUSA 4'' Bearing Puller For Automotive Mechanic (3-jaw): GEAR-4
ToolUSA 4" Bearing Puller For Automotive Mechanic (3-jaw): GEAR-4
By ToolUSA
In Stock
$13.99

mpn: B00VUGO4DC, ean: 7258006759368,

4.8 out of 5 stars with 129 reviews
This 4'' Bearing Puller/gear Puller Tool Is Used In Automotive Repair. It Is Made Of Drop Forged Steel For Strength. It Is Sturdy And Dependable For Years Of Reliable Use. It Is Also Available In Other Sizes. * 4-Inch long * Made of high-strength drop forged steel * Three jaw design allows even pressure around gear while rod in middle is tightened * Heavy duty design - weighs a solid 1.4 lbs * Professional quality - will be durable and long lasting for all your automobile needs BLACK FRIDAY



Viewing Page 1 of 7

View more products in Pullers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - roadcompass.org. All Rights Reserved.